Unique way to rid slight toxic
elements from pearl surface
The use of pulverizers, solvents and ball-milling technique:
With the use of low-temperature cleansing and pulverizing
equipment which employs the technology of pure physical
airflow, hyperfine pearl powder is produced and subsequently
mixed with an exclusive solvent that is mainly composed
of pure distilled water. The produced solution is to
be transferred to and sealed in containers made of specific
porcelain. Then it has to undergo 120 hours of "ball-milling"
in a low-temperature condition. The aim of the whole
process is to: 1. Rid slight toxic elements and smell
from pearl surface; 2. Enhance the natural efficacy
and fineness of pearl powders.
Exclusive "water-grinding and
hyper-refinement" technology to produce hyperfine
powders
The blending-sedimentation method of water grinding:
After undergoing the ball-milling process, the solution
will be transferred to a stainless steel container,
to which an appropriate amount of distilled water is
added, and be muddled for several times. Once a layer
of sediments is formed, it is muddled up again. Such
step is to be repeated several times in order to well
blend and purify the content. The solution is then left
still for several hours, after which sediments formed
will be collected in a vacuum dry container. It is then
dehumidified, revolved and dried in a spinning mechanism
under a temperature below 80 C in order to reduce the
high water content. A 100% quality guarantee is ensured
in this way.
A brief introduction of "hyperfine" powder:
The fineness degree of Jingmei pearl powder products
is even smaller than that set by the national standard
of R40/3, in which No.9 sieve is used as a benchmark
(with average internal diameter of pores amounting to
200 being 75 m 4.1). Our product is known to be "hyperfine"
powder because it can be measured by sieve with pore
numbers over 5 times of the fore-mentioned standard,
i.e. above 1200 pores. Such fineness facilitates passage
through esophagus and stomach for internal medication,
while accelerates comprehensive absorption through pores
and cells when used externally.
Sterilizing filling:
Jingmei Pearl Powder concern is
not just about purity and quality; it also put great
emphasis on its filling process. The process is all
done in a GMP germfree and sterilizing production line,
in which the standard of the production has met the
requirements set by the international pharmaceutical
regulations. This can help eliminate the bacteria, avoid
the level of mycete being exceeded, and prevent the
invasion of pathogenic bacteria (like Escherichia coli,
Pseudomonas aeruginosa, Staphyloccus aureus, etc.),
and the allergens in the air. It is not easy for customers
to notice their existence; therefore, customers must
pay extra attention when buying the product.
|
